Skip to product information
1 of 3

SharpenAir Needle Sharpener

SharpenAir Needle Sharpener

SKU: SHR01-Green

by Sharpenair

Regular price $67.97
Regular price Sale price $67.97
Sale Sold out
Shipping calculated at checkout.
Style

SharpenAir Airbrush Needle Repair Tool - Original

This is the first and only hand-held device that is specifically designed for repairing bent and damaged airbrush fluid needles. The concept and design was created by Chad Elliot especially for the airbrushing community. SharpenAir works by utilizing multiple angles allowing your damaged needle to be straightened efficiently and with precision each and every time while maintaining its factory angle. There are four channels that are uniquely angled to do the work for you. The sharpener stones are made up of varying grit and work together to provide you with a consistently perfect finish. How to use your SharpenAir

Original SharpenAir Model Works With ALL Airbrush Brands EXCEPT Paasche and DeVilbiss Dagr

Although the SharpenAir is quick and easy to use it is helpful to read our instructions before your first use to ensure proper sharpening of your airbrush fluid needle.

 SharpenAir contains four sharpening stones in its main compartment area where the logo is embossed. There are four "slots" or "channels" which run from the base of the sharpener vertically to the end of the sharpener.

Working your needle from right to left:

Step 1: Place the needle in the slot (far right) allowing the needle to reach the end of the slot. With minimal pressure begin rotating the needle in a clockwise direction; about 10-15 revolutions. Pull the needle out and check the tip. You may need to repeat this step a few times to achieve the desired straightness and/or until the burr is removed.

Step 2: This slot is at less of an angle than Step 1 and uses a less aggressive stone. Using the same amount of revolutions as step 1 (10-15), this step eases the angle even further in order to reach stock angle. This process will also help in removing some of the step one sand scratches. Step 3 and Step 4 are designed utilizing the same angle.

Step 3: contains a sanding stone consisting of a lower grit to quickly reshape the entire cone if needed. This step is optional. Smaller repairs may be completed at Step 2, however, a more damaged needle may utilize all steps in order to be completely sharpened.

Step 4: contains a higher grit sharpening stone and will further sand out the scratches from Step 3.

- If you have any further questions on how to operate your SharpenAir please feel free to contact us and we will be happy to help!

Quick tip:

  • SharpenAir sharpening stones are designed for you to receive maximum amount of use. They are each double-sided and can be rotated and flipped giving you the best results.
  • After sharpening your airbrush needle it may help to polish out the needle in order to avoid the onset of Dry Tip. An easy way of doing this is to use some metal polish, a cloth, a small piece of paper or 2000 grit sandpaper, and a drill. Add a little polish to the needle tip and place the needle tip inside the paper placed in between your finger and thumb, pinching the cone. Run the drill for 10-20 secs and repeat as many times as needed until the scratches have softened or smoothed. This step can be repeated using a soft cloth to further buff and polish your needle.

Please read our Shipping Policy and our Winter Shipping Policy

View full details

Customer Reviews

Based on 41 reviews
98%
(40)
2%
(1)
0%
(0)
0%
(0)
0%
(0)
P
Penelope Poulin (Vancouver, CA)
Airbrush needle sharpener

Followed the instructions and I am happy to say I was able to restore all my damaged needles. Worth every penny!

D
D.F. (Kensington, CA)
sharpenair

the holes are not large enough to accept a 2 mil passch vl series needles cant sharpen larger then 1.5 mil

K
Kim Mcgaw (Ladysmith, CA)
SharpenAir

Worked good, had to watch a video on it as it took a little longer then i thought it would but fixed two needles.

S
Stefan Anderson (Thunder Bay, CA)
Needle is straight and true

I caught my needle on my sleeve and bent the tip. When I received the SharpenAir from Maple Airbrush Supply I was skeptical. I ran my bent needle as instructed and after a few times through the bend was gone. I would recommend this product to anyone with a bent needle. Excellent product.

K
Kelly Smith (Calgary, CA)

My Sharpenair needle sharpener works awesome. Mapleleaf Rocks It!!