v.1 Custom Micron Replacement Parts
Models | CM-B | CM-C | CM-C Plus | CM-SB |
-
The Custom Micron Series airbrushes feature a special 'head system' which has all its parts meticulously hand matched and tested together as a set. It is tested , adjusted, and retested until the spray characteristics are as perfect as an airbrush can be. For optimum performance it is recommended the head assembly be purchased as a matched unit.
Precision made iwata Custom Micron Replacement Parts. You have invested in one of the best airbrushes on the market and it only makes sense to use genuine replacement parts to extend its life.
-
B SB C C+ 1 I 535 1 0.18mm Fluid Head System YES YES OPT OPT I 535 2 0.23mm Fluid Head System OPT OPT YES YES 1A I 535 1D Crown Cap YES YES YES YES 1B I 535 1C 0.18mm Fluid Head-Nozzle Cap YES YES OPT OPT I 535 2C 0.23mm Fluid Head-Nozzle Cap OPT OPT YES YES 1C I 535 1B 0.18mm Fluid Head-Nozzle YES YES OPT OPT I 535 2B 0.23 mm Fluid Head-Nozzle OPT OPT YES YES 1D I 535 1A Fluid Head Nozzle Base YES YES YES YES 2 I 580 2 Packing Fluid Head (O-ring) YES YES YES YES 3A I 525 2 Special Order - Body - SB* NO YES NO NO 3B I 525 3 Special Order - Body - C* NO NO YES NO 3C I 525 1 Special Order - Body - B* YES NO NO NO 3D I 525 6 Special Order - Body - C+* NO NO NO YES 4 I 580 3 Packing Fluid Needle (O-ring) YES YES YES NO 5 I 565 1 Needle Packing Screw YES YES YES YES 5A I 590 2 Packing Fluid Needle SET (PTFE) OPT OPT OPT YES 6 I 590 1 Spring Guide YES YES YES YES 7 I 550 1 Needle Chucking Guide YES YES YES YES 8 I 570 1 Needle Spring YES YES YES YES 9 I 575 1 Needle Spring Adjuster YES YES YES YES 10 I 540 4 0.18mm Fluid Needle YES YES OPT OPT I 540 2 0.23mm Fluid Needle OPT OPT YES YES I 540 3 0.23mm Fluid Needle CM-C+ NO NO NO YES 11 I 560 1 Needle Chucking nut YES YES YES YES 12 I 585 1 Pre-Set Handle Set YES YES YES OPT I 585 2 Pre-Set Handle (Single Cut) OPT OPT OPT YES 13 I 545 1 Main Lever OPT OPT YES YES I 545 2 MAIN LEVER CM-C+ YES YES OPT OPT 14 I 500 1 Air Piston YES YES YES YES 15 I 515 1 Auxiliary Lever YES YES YES YES 16 I 580 1 Packing Air Piston (O-ring, 2pcs) YES YES YES YES 17 I 510 1 Air Valve Set YES YES YES YES 17A I 510 2 Air Valve Body YES YES YES YES 17B I 505 1 Air Valve Piston YES YES YES YES 17C I 510 4 Air Valve Spring YES YES YES YES Blair Dru Blair Soft Spring YES YES YES YES 17D I 510 3 Air Valve Guide YES YES YES YES 18 I 555 1 Needle Chucking Guide Screw YES YES YES YES 19A I 530 1 Fluid Cup Lid NO NO YES OPT 19B I 618 1 Fluid Cup Lid NO NO OPT YES 20 I 045 2 Blanking Cover NO YES NO NO 21 I 070 3 Fluid Cup 1/8 oz. NO YES NO NO I 070 4 Fluid Cup 1/4 oz. NO YES NO NO 22 I 150 5 Packing Lower Lid (Gasket) NO YES NO NO 23 I 095 6 Lower Lid 1/8 oz. NO YES NO NO 28 I 605 1 Packing Handle (O-ring) NO NO NO YES 29 I 190 1 Micro Air Control Valve NO NO NO YES 30 I 190 2 Packing Mac Valve (O-ring) NO NO NO YES I 165 1 Spanner (nozzle wrench) YES YES YES YES
I 535 1B: Fluid Head Nozzle 0.18 mm
Sold Out
Fits the following Airbrushes:
Custom Micron Series:- CM-B
- CM-SB
I 535 1C: Fluid Head Nozzle Cap 0.18 mm
$48.99
iwata .18mm Fluid Head Nozzle Cap fits the custom Micron Series Airbrush:
- Custom Micron
- CM-B
- CM-SB
-
As the conversion option for:
- CM-C
- CM-C+
I 535 1: Fluid Head System 0.18 mm
$198.99
iwata 0.18mm Fluid Head Set includes:
- needle cap (#1A)
- nozzle cap (#1B)
- fluid nozzle (#1C)
- head system base (#1D)
tip: it's always a good idea to keep an extra on hand
Fits the following Airbrushes:
- Custom Micron Series:
- CM-B
- CM-SB
I 535 2B: Fluid Head Nozzle 0.23 mm
$83.99
Iwata 535 2B 0.23mm Nozzle as fitted to the following Airbrushes;
- Custom Micron
- CM-C
- CM-C Plus
- Converted TO .23
- CM-B
- CM-SB
- Kustom
- K-CM
I 540 2: Fluid Needle 0.23
$37.99
Iwata Custom Micron Replacement 0.23 Needle (v.1 & v.2)
- CM-C
- CM-C+
Optional - If your converting your CM-SB or CM-B to a .23 you must shorten the needle shaft to fit the airbrush - use your existing( v.2) .18 for the correct length.
- CM-SB
- CM-B
Kustom Micron:
- K-CM
I 540 3: Fluid Needle 0.23mm CM-C+
Sold Out
I-540-3 Fluid Needle 0.23 mm
iwata Custom Micron- CM-C+
- K-CM
I 535 2C: Fluid Head Nozzle Cap 0.23 mm
$48.99
iwata 0.23 mm Fluid Nozzle Cap fits:
- Custom Micron Series
- CM-C
- CM-C+
- As the conversion option for:
- CM-B
- CM-SB
- Kustom Series
- K-CM
I 535 2: Fluid Head System 0.23 mm
$198.99
iwata .23 Fluid Head System:
- The set includes: .23mm
- needle cap (#1A)
- nozzle cap (#1B)
- fluid nozzle (#1C)
- head system base (#1D)
tip: it's always a good idea to keep an extra on hand
Kustom: K-CM
I 535 1D: Crown Cap
$27.99
iwata crown cap fits :
- Custom Micron Series
- Kustom Series Airbrush
- K-CM
I 535 1A: Fluid Head Base
$135.99
This part fits the following models:
- Custom Micron Series:
- CM-B
- CM-C
- CM-C+
- CM-SB
- Kustom Series
- K-CM
I 580 3: Needle packing o-ring (rubber)
$14.29
Iwata Valve Piston O-ring fits the following Airbrush models:
- Custom Micron Series: v.1 & v.2
- CM-B
- CM-C
- CM-SB
I 580 2: Packing Air Valve Piston O:Ring
$17.99
Iwata Valve Piston O-ring fits the following Airbrush models: (2 per pack)
- Custom Micron Series:
- CM-B
- CM-C
- CM-C+
- CM-SB
- Kustom Series
- K-CM
I 580 1: Packing Valve Piston O-Ring
$14.29
iwata Packing Air Valve Piston O-ring fits the following Airbrush models:
- Eclipse Series:
- HP-BS
- HP-CS
- HP-BCS
- HP-SBS
-
Revolution Series:
- HP-AR
- HP-BR
- HP-CR
- HP-BCR
- HP-SAR
-
Custom Micron Series:
- CM-C
- CM-C+
- CM-B
- CM-SB
- Kustom Series:
- K-CM
I 190 2: Mac Valve Packing O-Ring
$8.39
I-190-2 Mac Valve Packing O-Ring
Iwata Airbrush Replacement Parts
The MAC Valve Packing O-Ring fits the following airbrushes:
- Hi-Line Series:
- HP-AH
- HP-BH
- HP-CH
- Custom Micron Series
- CM-C+
- Kustom Series:
- K-CH
- K-TH
- K-CM
I 605 1: Packing Head/Handle o-ring
$8.39
iwata Packing O-Ring fits the following airbrush models:
As a Packing Head O-Ring for:
- Eclipse Series:
- HP-BS
- HP-CS
- HP-BCS
- HP-SBS
- Kustom
- CS
- Eclipse Series:
- HP-BS
- HP-CS
- HP-BCS
- HP-SBS
- Hi-Line Series:
- HP-AH
- HP-BH
- HP-CH
- Custom Micron Series:
-
- CM-C+
- Kustom Series
- K-CH
- K-TR
- K-CS
I 590 2: Needle Packing Screw w/ Teflon Packing
$25.99
Iwata Needle Packing Screw w/ Teflon Packing fits the following Airbrush models:
- Custom Micron Series:
- CM-C+
- CM-B
- CM-C
- CM-SB
- Kustom Micron:
- K-CM
I 565 1: Micron Packing Screw
$17.99
Iwata Micron Packing Screw fits the following Airbrush models:
-
Custom Micron Series: v.1 & v.2
- CM-B
- CM-C
- CM-C+
- CM-SB
I 510 4: Air Valve Spring
$14.59
I-510-4 Air Valve Spring
Iwata Airbrush Replacement Parts
This Air Valve Spring fits the following airbrushes:
- Eclipse Series:
- HP-BS
- HP-CS
- HP-SBS
- Custom Micron Series:
- CM-B
- CM-C
- CM-C+
- CM-SB
- Kustom Series
- K-CS
I 570 1: Needle Spring
$14.29
This part fits the following Airbrush models:
- Custom Micron Series:
- CM-B
- CM-C
- CM-C+
- CM-SB
- Kustom Series:
- K-CM
I 190 1: MAC Valve Set
$25.99
I-190-1 MAC Valve Set
Iwata Airbrush Replacement Parts
The MAC (Micro Air Control) Valve Replacement Set fits the following Airbrush models:
- Hi-Line Series:
- HP-AH
- HP-BH
- HP-CH
- Custom Micron Series
- CM-C+
- Kustom Series:
- K-CH
- K-TH
- K-CM
I 545 1: Main Lever v.1
$37.99
This part fits the following models:
- Custom Micron Series: v.1
- CM-B
- CM-SB
I 545 2: Main Lever v1
$45.99
This iwata part fits the following models:
- Custom Micron Series: v.1
- CM-C
- CM-C+
I 500 1: Air Piston
$14.59
I-500-1 Air Piston
Iwata Airbrush Replacement Parts
This Air Piston fits the following Custom Micron models:
- CM-B
- CM-C
- CM-C+
- CM-SB
I 560 1: Needle Chucking Nut
$14.29
This part fits the following models:
- Custom Micron Series:
- CM-B
- CM-C
- CM-C+
- CM-SB
I 070 3: Side Cup 1/8oz
$55.29
I-070-3 Side Fluid Cup 1/8 oz
Iwata Airbrush Replacement Parts
This Fluid Cup 1/8oz fits the following side-feed airbrush models:
- Eclipse Series
- HP-SBS
- High Performance Series
- HP-SB
- High Performance Plus Series
- HP-SB Plus
- Custom Micron Series
- CM-SB
I 150 5: Packing Lower Lid
$8.39
I-150-5 Packing Lower Lid
Iwata Airbrush Replacement Parts
The Packing Lower Lid (gasket) fits the side feed cup.
I 045 2: Blanking Screw
$8.39
I-045-2 Blanking Screw
Iwata Airbrush Replacement Parts
The Blanking Screw fits the following models:- Eclipse Series
- HP-SBS
- Revolution Trigger Series
- HP-TR1
- HP-TR2
- High Performance Series
- HP-SB
- High Performance Plus Series:
- HP-SB+
- Custom Micron Series
- CM-SB
I 618 1: Fluid Cup Lid
$17.89
Iwata Fluid Cup Lid fits the following Airbrush models:
- Eclipse Series
- HP-CS
- High Performance Plus
- HP-C+
- High Line Series
- HP-CH
- Custom Micron Series
- CM-C+
- Kustom Series
- K-CS
I 530 1: Fluid Cup Lid
$37.99
I-530-1 Fluid Cup Lid
Iwata Airbrush Replacement Parts
This Fluid Cup Lid is a replacement part for the Custom Micron CM-C fluid cup
Blair: Soft Air Valve Spring - Deluxe SeT
$34.99 $58.04
Dru Blair SoftSpring: Deluxe Set
(Suitable for use with iwata airbrush models)
Deluxe Set Includes:
- a set of locking tweezers to make installation a breeze and as an added bonus
- a keepsake metal capsule that your spring is shipped in (Colors very - but if you have a preference let us know and we will attempt to honor your request.)
This is simply the best modification you can make to your Iwata airbrush.
- Eliminate trigger finger fatigue
- Reduce trigger tension promoting better trigger control
The BLAIR SoftSpring makes the downward pressure on your airbrush trigger (Main Lever) nearly effortless. Reducing tension and fatigue that so often limits the artist's control of the airbrush, especially when attempting fine details or long sessions.
The soft spring replicates the exact tolerances of Dru Blair's personally customized Iwata CM-SB which he began developing in the 1980's.
Dru Blair recommends avoiding the use of lubricants (Airbrush Super Lube/Blue Lube etc.) with SoftSpring since they often leave a sticky residue that can build-up and may create enough additional friction to prevent the trigger from returning to the air-off position. We have found cleaning the O-ring to offer only temporary relief. Replacement of the O-ring is the only way to eliminate the build-up.
Blair: Soft Air Valve Spring
$24.99 $34.99
Original BLAIR SoftSpring: Suitable for use with iwata airbrushes
- Remember that you get what you pay for, so beware of cheap imitations.Simply the best modification you can make to your Iwata airbrush.
- Reduces trigger tension thus promoting better trigger control
Stock air valve springs have too much tension. Replacing the original spring with a new BLAIR SoftSpring will make it much easier to control, as well as reduce finger fatigue.
The BLAIR SoftSpring, air valve replacement spring, for Iwata airbrushes was designed for the Iwata Custom Micron B/SB models. Since its development it has proven effective in virtually all models of Iwata airbrushes.
The BLAIR SoftSpring makes the downward pressure on your airbrush trigger (Main Lever) nearly effortless. This is good news because it reduces tension and fatigue that so often limits the artist's control of the airbrush, especially when attempting fine details. When coupled with a side feed airbrush such as the Iwata CM-SB your BLAIR SoftSpring will facilitate the hand position that Dru Blair uses and recommends for the highest level of airbrush control.
Super Lube!
Dru Blair Recommends that Airbrush Super Lube (the blue stuff in a tube often shipped with new airbrushes) should be avoided. Use of this product often leaves a sticky residue and if used around the trigger pin/air valve you may have to replace the o-ring.
While the original air valve spring may exert enough force to compensate and push through the gumminess your new SoftSpring is not designed to work under such conditions. The extra force this would require would negate the whole idea of lessening the spring tension in the first place.
A symptom of this build up is that it may create enough additional friction as to prevent the trigger from returning to the air-off position once your new SoftSpring is installed. We have found cleaning the O-ring to offer only temporary relief for a few days, and at other times, only minutes. Replacement of the O-ring is the only way to eliminate the buildup.
I 540 4: Fluid Needle 0.18mm
Sold Out
iwata Custom Micron: 0.18 mm Fluid Needle fits the following models V.1 and V.2
- CM-B
- CM-SB
optional for Conversion:
- CM-C+
- CM-C
© 2017 Maple Airbrush Supplies.
