This section doesn’t currently include any content. Add content to this section using the sidebar.

Image caption appears here

Add your deal, information or promotional text

This section doesn’t currently include any content. Add content to this section using the sidebar.

Image caption appears here

Add your deal, information or promotional text

Tamco

HP662

TAMCO High Solids EpoxyPrimer: DTA

1 item left

Tamco HP662 Premium 2K EPOXY Primer (DTA)

Direct to Anything (DTA)

DTA Premium 2K EPOXY Primer- Complete 2 Gallon Kit:

  • 1 Gallon Black Epoxy Primer
  • 1 Gallon DTA CATALYST

DTA (Direct to ANYTHING) EPOXY Premium 2k DTM Primer-Sealer is a special 1:1 Epoxy Primer with exceptional chemical adhesion to almost all substrates and direct-to-metal properties.

  • Very soft sanding, wet or dry after short dry times.
  • DTA Epoxy Primer provides NO shrinkage and the maximum in color holdout properties available in any product.
  • DTA may be used as a non-sanding primer-sealer
  • can be re-coated without sanding for up to 7 days
  • contains no vinyl - hence no orange peel.

HP662 DTA epoxies are made from the same propriety resins used by Boeing Aircraft.

Need Reducer? Click Here

For Professional Use Only
Proper Ventilation and fresh air respirator Required
Not for sale or use by the general public
-CANADA POST EXPEDITED SHIPPING ONLY - 
IF THE INCORRECT SHIPPING IS CHOSEN ANY REFUNDS ARE SUBJET TO A 20% FEE

Mix Ratio:

Component Volume DTA Aerospace 2k DTA Primer 1Part DTA Activator 1 Part

Viscosity 24-28 seconds in #2 Zahn Cup Pot Life 8 hours at 70F

Application:

  • Clean surface thoroughly using HR-397 Cleaner
  • Apply 1-2 medium coats of DTA with 20-25 minutes flash between coats.
  • Can apply Topcoat after 1 DAY without sanding,
    • For extra quality finish wet sand primer with 280-320 grit sandpaper before applying topcoats.
  • The earliest this epoxy should be top-coated is 3 hour, however is recommended to wait 1 day, then topcoat. You have 7 days to topcoat without having to sand the epoxy surface.

(Air Dry):

  • Flash Between Coats: 20-25 minutes
  • Wet Sanding: 8-12 hours

Maximum time for applying top-coat over non-sanded primer is 1 week.

Safety:

  • Before using any TAMCO products be sure to read all safety warnings and MSDS. Please read all directions carefully. For professional use only by trained painters. Not for sale or use by the general public.
SPECIAL NOTES: DTA is a unique blend, of special state of the art epoxy resins that has been tested to chemically adhere to almost any surface without sanding! Although TAMCO always recommends sanding primers for ultimate adhesion and appearance, DTA 2K Epoxy has been tested over stainless steel, aluminum, galvanize and other special metals without any sanding. TAMCO strongly recommends the use of our HR-397 cleaner before applying our DTA. A surface with any contamination will cause failure! Before using on an unknown surface, we suggest that a small test area is always coated first for adhesion qualities. DTA 2K Epoxy was formulated with the industry's best corrosion inhibiting ingredients to help keep rust from forming.

Customer Reviews

Based on 2 reviews
100%
(2)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
E
E.D.
Hp-662

This direct to anythig epoxy is amazing. Lays down so easy n looks amazing. A must for any project!!

T
T.B.
Excellent

An excellent epoxy primer

Search