Search

Tamco

HP5311G

TAMCO Primer - Black

Size: 5311: Gallon

4 items left

Tamco HP-5300 Series (DTM/DTR) Primers

Direct to Metal (DTM) and Direct to Rust

This Kit Contains:

  • 1  Primer
  • 1  Hardener

HP5300 is a unique one-of-a-kind 2K Acrylic URETHANE High Build Primer which can be applied directly over cleaned bare metals, aluminum and galvanized surfaces, TAMCO recommends HR-397 Wax and Grease Remover.

  • Reduce up to 10% with HR reducers
  • Reduce up to 25-30% to make a non-sanding sealer

Very soft sanding, wet or dry after short dry times. Primer provides minimal shrinkage and the maximum in color holdout properties available.

This is a very thick primer- Reduction will be required. We recommend up to 20% Reduction with HR series reducers!

Not for sale or use by the general public

-CANADA POST EXPEDITED SHIPPING ONLY -
IF THE INCORRECT SHIPPING IS CHOSEN ANY REFUNDS ARE SUBJET TO A 20% FEE

 

 


2K Primer : 4
HH-3100 Hardener: 1
Viscosity 26-33 seconds in #2 Zahn Cup Pot Life 1 hour at 70 degrees

Gun Setups:

  • Conventional
    • Siphon Feed: 1.6 mm - 2.0 mm (0.063" - 0.079")
    • Gravity Feed: 1.6 mm - 2.0 mm (0.063" - 0.079")
  • HVLP
    • Siphon Feed: 1.6 mm - 2.0 mm (0.063" - 0.079")
    • Gravity Feed: 1.6 mm - 2.0 mm (0.063" - 0.079")
Air Pressures
  • Conventional
    • Siphon Feed: 35-45 psi at the gun
    • Gravity Feed: 30-40 psi at the gun
  • HVLP
    • 8-10 psi at the gun

Application:

  1. Clean surface thoroughly using accepted body shop procedures
  2. Sand per accepted body shop procedures for substrate being used and final clean with solvent wipe
  3. Apply 2-3 medium coats of HP-5311 with 10-15 minutes flash between coats
  4. Do not apply more primer after 1 hour from completion.

Flash/Dry Times (Air Dry):

  • Flash Between Coats: 10-15 minutes
  • Wet Sanding: 1 hour
  • Dry Sanding: 1 hour

Technical Data & Physical Properties:

  • Color: Grey
  • Sprayable Viscosity: 26-33 sec. #2Z
  • Pot Life: 1 hour Mix Ratio 4:1
  • Weight Solids 64% Volume Solids 47%
  • Weight per Gallon: 10.7 lbs
  • Color Holdout Excellent
  • Flash Point 22C
  • Solvent Resistance Excellent
  • Package VOC 3.99 lbs/gal RTS VOC 3.20 lbs/gal

Safety:

- proper ventilation and respirator use -

Before using any Tamco products be sure to read all safety warnings and MSDS.

Please read all directions carefully.
For professional use only. Not for sale or use by the general public

Customer Reviews

Based on 3 reviews
100%
(3)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
F
F.
Very good service

I received very good service and prompt delivery!

T
T.B.
Fantastic

Fantastic primer. Fantastic service

M
M.S.
Excellent primer and very cost effective

Excellent primer and very cost effective