Car-Rep 2K Color Top Coats

CAR-REP 2K EPOXY COLOR TOP COATS WITH WISE 2K TECHNOLOGY

Designed for performance — forming the hardest, chemically resistant and durable finish that’s perfect for any almost any project

• Direct to Metal Applications.
• Requires no primers or clear coats
• Easy to apply with high coverage (up to 27 sq. ft.)
• Revolutionary 2K technology
• 2 Components, 1 Compartment
• Unlimited Pot-life, No Waste
• No mixing or activation, always ready
• DIRECT TO METAL Epoxy
• Excellent anti-corrosion properties
• Superior adhesion
• Chemical & scratch resistance
• Apply on all metals, carbon fibre & most plastics
• Bonds to powder coating, 1K paints, acrylics, glass etc.
• Short 3 minute flash-off
• Superior high gloss finish standard
• Boost dry times with IR

Unlimited pot life use the entire can or use what you need the next time you need it it will be ready for you!

Application Specifications

Dust dry:15 min

Touch dry:60 min

Polishable: Overnight

Final hardness and chemical resistance:8-10 days 

Aerosol spraying distance: 15-25 cm (6-10 in)

Coats: Maximum 3 layers

Flash-off time: 3 min between layers

Application: It is better to apply more thin layers than a few thick layers. Final layer should always be a wet layer. Application and curing temperature 18-25°C (64-77°F)

Dry: After curing overnight or 40 min @ 70 °C (158 °F)

Clean nozzle: By holding the can upside down and spraying for 5 seconds

Surface Preparation: Clean and sand the surface thoroughly. Start with 320, proceed with 400, then wet sand with 600 or 800. Clean the surface with a pre paint cleaner such as degreaser. Make sure the cleaner doesn’t contain strong solvents such as thinner or acetone. For previously painted surfaces, make sure the previous layer is fully cured before overpainting if not advised otherwise.

Please read our Shipping Policy and our Winter Shipping Policy