These bottle adapter caps will fit onto a Createx; Wicked; AutoAir; AutoBorne and Trident paint bottle or an Iwata bottle. It comes with a solvent resistant tube of approximately 10cm length that may be cut down to the required length.
The adapter fits Iwata, Badger, Paasche VL and most other syphon feed airbrushes
For correct sizing: measure the diameter of the neck of your bottle (edge to edge) or the inside diameter of the bottle cap.
No gasket means no deterioration and less parts for fewer hassles
includes a red cap or "redi-cap" which fits on the siphon tube to store paints in the bottles
If you are storing paint for long periods of time you will need to place a piece of tape or a tooth-pick into the breather hole during storage