Usually ready in 2 hours
is an adhesive component, which gives decals greater adhesion to plastic parts. It is much easier to affix decals to plastic model part where the parts either have a rough or irregular surface.
Apply a small drop of Mr. Mark Softer to the area where the decal will go using the brush attached to the bottle cap. Apply the decal over this area. Apply gentle pressure to the decal with a soft cloth, removing any excessive liquid and ensuring that the decal down fast
Mr. Setter and Mr. Softer help best on waterslides that go over curved/uneven shapes/surfaces rather than flat areas of the piece. They help the decal contour and stick to the piece well as if painted on. Its also a good idea to just go ahead and use setter and softer for all the decals you use anywhere on the kit
I have had a lot of decals on my models not want to hold in place after dry and want to fall off, or when clear coating blow off. This stuff really adheres them down well and used with Mr.Mark softener, the decals will be bonded down and wont remove by the accident of fly sneezing. I have tested it on 30 year old decals that due to age won't stick down on their own to the models, this stuff has bonded them down on my test subject.
18526 - 104 Avneue NW
Edmonton, AB T5S 0K3
Monday - Saturday 10:00am - 5:00pm (MST)
*Closed Sunday & Holidays
!