HC9500: Hi Speed Clear
HC9500-Q
$89.99
Tamco HC-9500 Hi-Impact Hi-Speed Clear
"The only clear that can take a brutal beating day after day"
With this 30 minute SPEED clear, you can literally cut and buff this clear in 35 minutes. A revolutionary speed clear will increase your production. This Speed Clear will not lose its gloss, most people will achieve an OFF THE GUN glass finish eliminating the need to cut and buff. But you can if desired.
This does everything HI IMPACT does, but way faster.
Kit includes:
- HC9500 Hi-Impact Speed clear coat
- Hardener: HH7605 (Medium)
This clear is Ideal for ALL Extreme Sports. The MOST Durable clear we make! Formulated to be top-coated over custom airbrush work. When you have hundreds of hours into custom airbrush designs, you need a clear that can protect that investment.
This specially formulated Clear was made to take a beating
- Hockey Masks
- Race Car Helmets
- Hard Hats
- Snowboard
- Surf Boards
- Skate boards,
- Everything in the BMX world that needs clear for durability,
- Dirt Bikes, Race Cars, Baja Trucks, everyone who participates in the X-Games, Paintball.
- Fishing Lures, Baits, Cranks AND Custom Painted Fishing Rods!
Mix Ratio: 4:1
- Component Volume HI-SPEED IMPACT 4; HH-7605 1
Viscosity:
- 18-20 seconds in #2 Zahn Cup
Gun Setups:
- Conventional Siphon Feed: 1.5 mm - 1.7 mm (0.059" - 0.067")
- Gravity Feed: 1.4 mm - 1.6 mm (0.055" - 0.063")
- HVLP Siphon Feed: 1.6 mm - 1.7 mm (0.063" - 0.067")
Air Pressures:
- Conventional Siphon Feed: 25-35 psi at the gun
- Gravity Feed: 25-35 psi at the gun
- HVLP 6-8 psi at the gun Application:
Allow base-coat to dry 10-15 minutes. 30 minutes if applying multiple coats of pearl or if shop is below 70F.
Do not apply more clear UNTIL THE NEXT DAY!
This product "flows" and you will notice "orange-peel" level off by itself. Can be buffed for up to 7 days (at 70 degrees)
- We do not recommend baking this clear,
Flash/Dry Times (Air Dry): Flash Between Coats: NO FLASH TIME, re-coat right away.
Dust Free: 5 minutes
Time to Assemble: 1 hour
Time to Polish:1 hour
Time to Stripe: 1 hour
Time to Deliver: 1 hour
Time to Decal: 8 hours
Optimum Times: Air Dry: 30 minutes @ 70F;
Sanding: Use 1500 grit or finer or use 1500 DA or finer Compounding:
Use finishing compound: Apply a thin ribbon of material to the area to be polished. Use a double sided wool pad or a foam pad. Maintain air polisher or variable speed polisher at 1800- 3000 rpm. Remove excess finishing compound with a clean soft cloth prior to applying finishing polishing.
Technical Data & Physical Properties:
- Color Clear Sprayable Viscosity 18-20 sec. #2Z
- Pot Life 4-8 hour
- Mix Ratio 4:1
- Weight Solids 50% Volume Solids
- 45% Gloss Excellent
- Weight per Gallon 8.10 lbs
- Color Holdout Excellent
- Humidity Resistance Excellent
- Flash Point 25F Solvent Resistance Package
- VOC 3.25 lbs/gal
- Repairability Excellent
- RTS VOC 3.50 lbs/gal
- Florida Exposure Excellent Chip Resistance Excellent
Before using any TAMCO products be sure to read all safety warnings, directions and MSDS.
For professional use only. Not for sale or use by the general public.
Related Items
HR398: Wax and Grease Remover
$59.99
TAMCO HR-398 - Final Wipe (Paint Safe)
Wax and Grease Remover
Final Wipe is a high quality cleaner that is safe for use on fresh paint, paints that are lacquer or not fully cured. Great for interior panels too. This formula uses 25% IPA and also acts as an anti-static remover. Cuts down on dirt in paint jobs. Nothing safer or better! USE for pre-cleaning
- Always soap and wash before using a wax and grease remover!
- Apply HR-398 with a rag, or a spray bottle
- Wipe off before it dries or you will not remove the contaminant! Wipe off with clean lint-free dry rags.
- Use HR-398 only after you start priming! It is a final wipe cleaner and anti-static solution.
Safety:
Before using any TAMCO products be sure to read all safety warnings and MSDS. Please read all directions carefully.
For professional use only by trained painters. Not for sale or use by the general public.
HR397 - Wax and Grease Removers: Cleaners
$59.99
TAMCO HR397 Wax and Grease Remover
Cleaner for Pre-Sanding and Pre-Priming
This high quality cleaner HR397 is a pre- sanding cleaner, made with very aggressive solvents. This product will remove fresh paint. Do not use on new paint or primer.Use HR397 before sanding the car, and again before priming.. USE HR398 Final Wipe as a paint safe cleaner.
- Always Wash and Soap before using a wax and grease remover
- Apply HR397 with a rag, or a spray bottle
- Wipe off before it dries, or you will not remove the contaminants
Safety:
Before using any TAMCO products be sure to read all safety warnings and MSDS. Please read all directions carefully.
For professional use only by trained painters. Not for sale or use by the general public.
HR1370: Medium Reducer
$29.99
Tamco HR-1370 Medium Urethane Reducer
Quality is not lost simply because TAMCO products are affordable.
- TAMCO uses ONLY 'urethane grade solvents' in all their products
- Use from 75-95 degrees depending on surface size to keep wet.
Before using any TAMCO products be sure to read all safety warnings and MSDS . Please read all directions carefully.
For professional use only. Not for sale or use by the general public
HP2010: Top Dog Adhesion Promoter
$114.99
HP2010: Top Dog Adhesion Promoter
Adhesion Promoter is designed to promote paint adhesion to all automotive surfaces, even problem plastics. It works equally well on all flexible or rigid plastics, fiberglass, aluminum, glass, chrome, vinyl, galvanized metal, and painted surfaces. TOP DOG acts as a tie coat by allowing several different surfaces to be painted at the same time to assure a smooth, flawless, durable finish every time.
© 2017 Maple Airbrush Supplies.
